COREMAX 310LP is a flux-cored wire for 25%Cr-20%Ni stainless steel and dissimilar metals welding. Proper ferrite contents cause good crack-resistant performance, but welding parameters must be optimized to avoid hot cracking, avoid concave beads. Typical used for welding or repairing high alloy heads and corrosion-resistant castings of the same general composition.

Operational and Packaging Data:

• Diameter: 1.2mm, 1.4mm, and 1.6mm.

Notes on Usage and Welding Condition:

• The oil stains and rust on the weldments should be cleared away.
• Designed for welding with 100% CO₂.
• When welding, the gas flow rate is generally 20 ~ 25L/min.
• Interpass temperature controlled below 120˚
• Use low input heat.